How to Find and Fix Minor Drips Before They Cause Major Damage

As a homeowner, one of the things that you will need to maintain are the plumbing structures. In any home, there are several plumbing structures in the kitchen and the bathrooms. These plumbing structures are critical to completing tasks such as bathing and sanitizing the home. At times these plumbing structures may not work properly and you will therefore need to fix them. Whenever there is water leak plumbing, you will need to follow some steps in order to repair any plumbing structure in the home. By following these steps, you will be able to efficiently address water leak plumbing.


One of the most common leaks that you may have is splash leaks in the tub and shower. In order to determine if you have a splash leak, you will need to look for things such as curling on the floors and the tiles of the but being loose. There may also be stains of water on the ceiling, mold spots and any water that is located on the surface after a shower.

In order to fix this type of leak, you will need to make sure that the overlap sliding doors are properly closed when using the doors. It is important that the inner door is always located by the one closest to the faucet. You will also need to seal the frame. To do this, you will need to put small beads on the tub and place caulk on any frame where the leak is nearby. You may also need to get a new door sweep or buy a new gasket.


Any leaks of the drain in the tub and shower are also among the most common that you may encounter. These enable the water to get around the exterior of a drain when it is connected to the bathtub or shower head. It’s very common among tubs and shower drains that are made out of plastic or fiberglass.

The best way to look for these types of leaks is to see if there are any stains of water on any ceilings. You will also need to look for loose flooring by a bathtub or floor surfaces that are damp in rooms that adjoin the bathroom.

In order to fix this type of leak, you will need to repair the tub drain by unscrewing the drain flange. Then you will need to cleanse the area and put on a silicone caulk. You will also need to remove the rubber gasket under the tub drain. You will then need to replace the gasket. It may also be necessary to fasten the ring nut more tightly on the drain so that it is more secure.


Tile leaks of the tub and shower are also among the most common leaks that may occur. These take place when water seeps through any caulk or grout that is present behind the walls behind the shower tile. This kind of leak can eventually lead to the wall falling down or the wall framing rotting.

Whenever you suspect that there may be tube and shower tile leaks, it is important to look for a number of signs. These include loose tiles, mold, stains on the ceiling by the shower, and peeling paint outside of the wall.

In order to locate where the leaks are coming from, you will need to look at any joints and caulk in order to find any gaps. In most cases mold will be present in this area. You will also want to examine the access panel and the faucet to see if there is any dampness or stains. To fix this type of leak, the first thing that you will need to do is remove any old grout, caulk or loose tiles. If you determine that any surfaces by the tiles are solid, then you just need to reattach the tiles, regrout and recaulk the tub tile. Whenever any tiles are soft or loose, then you will need to install a new backer board and new tiles. You will also need to put in new fiberglass as well.

Written by